Cable heating system "warm floor" - a built-in electric heating system. The system is designed to heat a variety of industrial and residential buildings (apartments, houses, loggias, greenhouses, saunas, garages, shops, restaurants). The system can be used as a moderate and in severe climatic conditions.

Depending on the configuration cable heating system cable heating system (SOS) - "warm floors" can be used as:

• the main heating system - the entire heating - detached houses, cottages, offered in cases where there is no possibility to connect to central water heating system. "The complete heating" compensates heat loss and provides a constant set temperature of air in the room;

• Additional heating system - heating comfort - for thermal comfort in rooms with a cold floor with the main heating systems. "Comfortable heating, maintains a comfortable temperature of the floor.
Standard package of cable heating system Warm Floors "consists of the following products:

• The heating cable - Section particular building and the length of installed capacity, prepared for connection to an AC voltage of 220 V, 50 Hz;
• Thermostat with temperature sensor;
• Mounting Tape - special galvanized mounting tape required to fix the heating cable on the surface of the concrete base floor;
• corrugated tube (to accommodate the sensor and protect it from damage).
Depending on the particular location and floor construction in the kit may include the following additional materials:
• Insulation (Isofol, penofol). Application of insulation necessary in those cases where the bottom (under the floor heated room) is a cold room or there are local zones of cooling - not heated basement, ground, and so on.
Heat-reflective screen

• (foil or mesh welded galvanized). The system "warm floor" is applicable to heat as concrete floors with different types of coatings, and for heating wooden floors. In the case of heating wooden floors in addition to the standard set of products should include galvanized welded mesh, which is recommended to lay the heating cable.

To ensure reliability and security, simplify systems management and automation of heating systems, heated floors are used controllers Russian production - Therma-3 "or thermostats production OJ Elektronics Denmark - MTU-1991H, OTN-1991H, OCC2-1991 (a programmable thermostat ), staffed by sensors (sensors). Application controllers / thermostats can reduce energy consumption CND - heated floors.

In KNS - "Warm floors are used resistive heating cables Russian production, constructed and tested technology for high reliability. Braided shielding the cable is protected against mechanical damage, the electrical protective earth, and prevents the propagation of electromagnetic fields.

The required specific power per unit length cable, power cable, heating, cable length, the equipment are determined based on the following data:

1.Oblast application - kind of premises. The premises - entrance hall, kitchen, living room or industrial building - office, shop, garage, basement, etc.).
2.Naznachenie CND - heated floors - maintaining a comfortable temperature of the floor or the entire heating, providing a constant set temperature of air in the room.
3.Tip flooring - flooring on a concrete base covered with wood, laminita, parquet - wood floor or floors on a concrete base covered with ceramic tiles, porcelain, etc.).
4. Usloviya location heated premises (whether the room on the ground - the ground floor, or in conditions of poor heating from below can be half the room is laid directly on the ground).
5. Ploschad rooms - total area and usable floor area (area of the premises free of permanently installed equipment, furniture).
6. Vid thermostat - with a simple or programmable timer.
Installation and connection to the electrical network CNN - "Warm floors can be implemented independently, thus should be performed and complied with all requirements of standards PES, SNIP. Failure to comply with standards for installation of the system affects its performance, so despite the apparent simplicity should entrust this work to professionals.

The undeniable benefits of cable heating systems (SOS) - "warm floors":

1. Optimalny comfort.
The system "warm floor" - with a heated floor provides a more comfortable warmth than alternative radiator systems. In rooms with central heating, warm air from the battery rises to the ceiling, then cools and falls to the floor, creating thermal discomfort. The system "warm floor" creates the optimum air temperature at feet and head. As the convection currents are practically absent, raises a much smaller amount of dust, which is important for people with allergies or asthma.
2. Minimalnoe energy consumption.
Thanks to the optimal distribution of heat and precise control system, the average temperature in the room can be 1-2 град.С lower compared with the traditional heating system.
3. Gibkost system.
Cable heating systems, heated floors are used in heating systems provide a comfortable temperature in the apartment, office, shop, gym, etc. In this system, heated floors can be installed on the construction of sex of any type, whether it be concrete or wood floors.
4. Nevidimost heat source.
Cable heating system "warm floor" is an invisible, built-in floor electric heating system, opening new possibilities for the design of interior spaces, eliminating the problem by installing radiators.
5. Dolgovechnost and lack of maintenance.
Cable heating systems, heated floors can last as much as long as the facilities in which they are installed without requiring service!
6. Kachestvo, reliability and warranty.
Quality and reliability of equipment used in the ANC "warm floor" is confirmed by appropriate certificates. The warranty period for heating cables of the system "warm floor" is 16 years for controllers 12 months from the date of commissioning.
7. Ekologichnost.
Using electricity for heating is a reasonable from an environmental point of view of the decision. Electricity - is the most effective form of energy that can be transported without pollution.